What Is Lexan? Polycarbonate Sign Face Guide
Lexan is a UV-stabilized extruded polycarbonate sheet material used for impact-resistant storefront light box faces, thermoformed pan faces, and protective glazing across NYC and NJ. Send your cabinet dimensions and panel thickness for an itemized quote within 24 hours.
- Itemized quote in 24 hours: send your sign face dimensions, thickness, flat or pan depth, and deadline
- Proof before production: you approve a digital proof before anything is made
- Delivery & install: across Manhattan, Brooklyn, Queens, the Bronx, Staten Island and New Jersey
Get a Lexan Sign Face Quote
Tell us the panel size, thickness, quantity and deadline. Artwork or a photo helps.
What Is Lexan Polycarbonate?
Lexan is a trademarked brand name (originally introduced by General Electric Plastics and now produced by SABIC) for extruded polycarbonate thermoplastic sheet. In the commercial sign trade across New York City, the term Lexan is widely used to describe UV-stabilized, high-impact polycarbonate sign faces designed for illuminated cabinets, protective glazing, and street-level displays that cannot afford to crack or shatter.
Unlike standard float glass or rigid cast acrylic, polycarbonate absorbs heavy blunt force by flexing slightly rather than snapping. Sign-grade sheets such as Lexan Solar Grade (SG305) and EXELL D are extruded with dual-sided UV-2 cap layers that shield the polymer from sunlight, helping prevent yellowing, hazing, and brittle failure through New York freeze-thaw winters and summer heat.
Core Polycarbonate Performance Specs
- Impact Strength: Approximately 250x stronger than standard float glass and roughly 30x stronger than cast acrylic.
- Heat Deflection: Around 270°F (132°C), resisting distortion inside warm enclosed LED sign cabinets.
- Optical Transmission: Up to 82%–88% light transmission in clear sheets, plus calibrated white diffuser grades for even LED light spread.
- Weathering Protection: Co-extruded dual-sided UV-2 solar cap resists outdoor chalking and color shift.
- Cold Formability: Can be cold-bent on gentle radii or oven-thermoformed into raised 3D pan faces.
All Lexan panels ordered through Signs River are produced by our network of vetted New York–area fabricators and managed start to finish by Signs River.
Lexan Polycarbonate vs. Acrylic (Plexiglas) for Signs
Lexan (polycarbonate) and acrylic (often called Plexiglas or PMMA) look similar at a glance, so buyers frequently ask which material belongs on a commercial storefront. Both transmit light cleanly, yet they behave very differently during cutting, routing, thermoforming, and street-level impact. For decorative indoor lobby plaques or polished dimensional lettering, acrylic standoff signs and rigid plaques provide crisp laser-polished edges. When toughness, flex, and shatter resistance matter most, polycarbonate is the safer choice.
Choose Lexan (Polycarbonate) When You Need:
- High Impact & Vandal Resistance: Ideal for ground-floor storefronts, transit corridors, schools, and alleys where thrown objects or heavy wind debris could break acrylic.
- Routing, Drilling & Cold Bending: Cuts and drills cleanly near edges without spider-cracking; flexes safely into aluminum cabinet retainer channels.
- Thermoformed Pan Faces: Forms cleanly in deep-draw vacuum molds with crisp return lips and embossed copy.
- High Heat Tolerance: Handles elevated internal temperatures inside compact LED or legacy fluorescent sign cabinets without warping.
- Glazing & Protective Covers: Shields outdoor directories, construction posting boards, and outdoor signs from weather and impact.
Choose Cast or Extruded Acrylic When You Need:
- Crystal-Clear Optical Gloss: Offers up to 92% light transmission with a harder, slightly glossier surface finish for gallery and retail interiors.
- Flame-Polished & Beveled Edges: Laser cuts produce glass-clear, mirror-smooth perimeter edges suitable for standalone plaques and rigid architectural signs.
- Higher Surface Scratch Resistance: Harder surface resists light wiping abrasion better than uncoated polycarbonate when cleaned frequently indoors.
- Dimensional Cut Letters: Cast acrylic routes cleanly into push-through illuminated letters and thick 3D wall logos.
- Natural UV Stability: Inherently UV-stable across non-illuminated interior lobbies and crisp reception displays.
Common Lexan Signage Applications in NYC
From narrow Brooklyn side streets to busy Manhattan corridors, polycarbonate sign panels keep illuminated cabinets and protective displays intact under harsh weather and high pedestrian traffic.
Illuminated Light Box Faces
Translucent white diffuser polycarbonate panels finished with translucent cut vinyl or backlit digital graphics slide straight into aluminum extrusions for light box signs, storefront awnings, and interior menu headers.
Thermoformed & Embossed Pan Faces
Oven-heated polycarbonate forms smoothly over custom wooden or aluminum molds to create raised faces and dimensional embossed branding for commercial wall pan signs and pylon cabinets.
Double-Sided Blade Sign Cabinets
Projecting blade signs mounted perpendicular to building facades catch wind gusts and delivery-cart bumps; polycarbonate faces protect internal LED modules from cracking.
Protective Glazing & Vandal Covers
Clear UV-protected Lexan sheets act as transparent security overlays over transit wayfinding maps, building directories, and street-level outdoor storefront displays.
Flat Rigid & Cabinet Replacement Panels
When an existing cabinet frame is still sound, swapping in a fresh cut polycarbonate panel alongside rigid signs refreshes branding without replacing electrical hardware.
Flat-Sheet vs. Pan-Face Selection
Flat polycarbonate panels fit smaller cabinets and easy slide-in frames, while thermoformed pan faces add perimeter rigidity to prevent wide sign faces from bowing or rattling in wind.
Standard Lexan Thicknesses, Formats & Pricing Factors
Choosing the right polycarbonate gauge prevents face bowing, light leakage, and retainer blowout in wide outdoor cabinets. Below is how nominal sheet thicknesses pair with sign sizes and what determines an itemized quote.
Standard Nominal Thicknesses & Use Cases
- 1/16″ (0.060″): Lightweight clear protective covers, small directory frames, and flat interior overlays.
- 3/32″ (0.093″): Compact flat light box panels and small-format interior or sheltered exterior displays.
- 1/8″ (0.118″–0.125″): Standard gauge for small-to-medium flat illuminated faces and smaller projecting cabinets.
- 3/16″ (0.177″): Preferred gauge for mid-to-large storefront cabinets, thermoformed pan faces, and windy NYC corridors where stiffness matters.
- 1/4″ (0.236″–0.250″): Heavy-duty oversized sign cabinets, wide pylon panels, and high-security clear protective glazing.
Sheets are typically supplied from 4×8 ft, 5×10 ft, and oversized 6×12 ft master formats in clear, translucent white (light-diffusing), or tinted bronze grades.
What Drives Lexan Sign Face Pricing
- Gauge & UV Grade: Moving from 3/32″ or 1/8″ to 3/16″ or 1/4″ dual-sided UV-2 solar polycarbonate increases material cost proportionally.
- Panel Size & Sheet Yield: Dimensions that fit efficiently on a 4×8 ft sheet cost less per panel than oversized runs requiring 5×10 ft or 6×12 ft formats.
- Flat Cut vs. Formed Pan Face: Flat sheared or CNC-routed panels require minimal prep, whereas vacuum-formed pan faces and embossed letters involve mold tooling and oven forming.
- Graphics & Illumination Finish: Blank white panels cost less than custom translucent vinyl overlays or high-density backlit printing tuned for day and night contrast.
- Installation & Access: Ground-level panel swaps differ from upper-facade cabinet openings requiring lifts or specialized rigging partners.
Share your viewable opening size, cabinet depth, and whether you need a flat sheet or formed pan face to receive an itemized quote within 24 hours.
How to Clean and Maintain Lexan Polycarbonate Sign Faces
Polycarbonate is extraordinarily impact-resistant, but its surface is chemically sensitive to common household glass cleaners and harsh solvents. Following the right maintenance routine keeps sign faces clear and preserves the outer UV protective cap layer.
- Avoid Ammonia & Ketone Cleaners: Never apply ammonia-based glass sprays, acetone, lacquer thinner, gasoline, or abrasive scouring pads to Lexan. Harsh chemicals trigger micro-crazing, cloudiness, and stress cracking around mounting holes or retainer lips.
- Rinse Grit Before Wiping: Flush away NYC sidewalk dust, exhaust residue, and sand with lukewarm water before touching the face with a cloth so grit does not scratch the plastic.
- Use Mild Soap & Soft Microfiber: Wash gently using diluted mild dish soap or a polycarbonate-safe plastic cleaner with a clean soft microfiber cloth or sponge, rinse with clean water, and blot dry.
- Check Cabinet Drainage & Retainers: When swapping a panel, clear blocked weep holes at the bottom of the aluminum frame so trapped condensation does not stain the back of the sign face.
Related NYC Sign Materials & Services
Compare Lexan polycarbonate with other commercial substrates and cabinet options:
- Light Box Signs NYC – illuminated storefront cabinets with polycarbonate or acrylic faces
- Wall Pan Signs – formed and embossed faces for commercial facades
- Blade Signs – projecting double-sided storefront signage
- Rigid Signs – compare polycarbonate, acrylic, aluminum, ACM, and PVC panels
- Outdoor Signs – full exterior commercial sign options across NYC
- Dibond Material Guide • Sintra Board Guide • Large Format Printing
Lexan Polycarbonate Sign Face FAQs
What is Lexan and how does its impact resistance compare to glass and acrylic?
Lexan is a brand name for extruded polycarbonate thermoplastic sheet. In sign-grade formulations, it offers roughly 250 times the impact resistance of standard float glass and about 30 times that of standard acrylic, making it resistant to windborne debris, hail, and accidental strikes.
Why is Lexan polycarbonate commonly chosen for illuminated sign faces in NYC?
New York City storefronts and projecting cabinets face heavy weather, street debris, and daily wear. Lexan sign faces resist shattering, tolerate heat inside illuminated LED cabinets with a high heat-deflection temperature around 270°F, and flex slightly without cracking when installed in aluminum retainers.
Does outdoor Lexan turn yellow or brittle from sunlight over time?
Sign-grade exterior polycarbonate sheets such as Solar Grade UV-2 grades are extruded with dual-sided co-extruded UV protective cap layers. These UV inhibitors absorb ultraviolet radiation to help prevent yellowing, surface hazing, and brittleness outdoors.
What thicknesses and formats are used for Lexan sign faces?
Common nominal thicknesses include 1/16 inch (0.060″), 3/32 inch (0.093″), 1/8 inch (0.118″ to 0.125″), 3/16 inch (0.177″), and 1/4 inch (0.236″ to 0.250″) across clear, translucent white diffuser, and tinted sheet options in flat cut panels or oversized sign cabinet sheets.
Can Lexan be vacuum-formed into raised 3D pan faces?
Yes. Polycarbonate sheets can be heated and thermoformed into embossed or flat-raised pan faces with perimeter return lips that fit standard aluminum light box cabinet retainers.
How should you clean a Lexan polycarbonate sign face without damaging it?
Never use ammonia glass cleaners, acetone, ketones, or abrasive pads on polycarbonate, as they cause surface crazing and clouding. Rinse loose grit with clean water first, wash gently with mild soap and a soft microfiber cloth, then rinse and dry cleanly.
