Custom Signage & Commercial Fabrication · Serving NYC, NJ & PA
×
• Custom Rigid Boards • Ask About Expedited Options

Rigid Signs NYC — Foam Board, Sintra & Dibond Printing

Custom printed and cut rigid signs. Timing and delivery depend on your material, quantity, budget, and destination.

  • True 1200 DPI Flatbed UV Printing
  • Seamless Sheets Up to 48" × 96"
  • Custom CNC Contour Routing
  • Ask About Expedited Delivery
Custom rigid sign boards in NYC including brushed Dibond aluminum composite, matte Sintra PVC, black-core Gatorboard easel display, and acrylic standoff plaque
6 Rigid Cores: Foam • Gator • Sintra • Dibond • Coroplast • AcrylicProject-Specific Scheduling

Direct Flatbed UV Curing

We print UV-cured pigment inks directly onto rigid boards at 1200 DPI—eliminating vinyl air bubbles, edge peeling, and delamination.

Stay-Flat Structural Cores

Choose from featherlight polystyrene foam, crush-proof wood-fiber Gatorfoam, solid expanded PVC, or hurricane-rated aluminum composite.

CNC Contour Die-Cutting

High-speed multi-axis CNC routers trim custom logo silhouettes, rounded safety corners, and pre-drilled standoff or grommet holes.

Delivery Options

Flat-packed cargo van and messenger delivery directly to Manhattan offices, Javits Center booths, SoHo pop-ups, and DOB job sites.

NYC Rigid Board Catalog

Explore All 6 Custom Rigid Sign Substrates

Select the exact board thickness, core density, and weather rating engineered for your indoor presentation or exterior installation.

Custom printed foam board event sign with sharp architecture summit artwork on floor tripod easel in Manhattan lobby
Indoor Events & Easels • 3/16" & 1/2"

Foam Board / Foamcore Signs

Featherlight extruded polystyrene core between smooth, bright-white clay-coated faces. The #1 economical choice for indoor floor easels, conference check-ins, and pitch presentations.

  • Ultra-lightweight for portable tripod easels
  • Glare-free matte print finish for photography
  • Optional self-standing double-wing easel backs
Custom printed black-core Gatorboard trade show display panels with architectural graphics in Javits Center NYC booth
Crush-Proof Heavy Duty • 3/16", 1/2" & 1"

Gatorboard (Gatorfoam) Panels

Dense polystyrene core fused with hard Luxcell wood-fiber veneer faces. Unlike standard foamcore, Gatorboard resists corner crushing, warping, and bowing across repeated trade show use.

  • 10x stronger dent & flex resistance than Foamcore
  • Available in sleek all-black or bright-white edge cores
  • Ideal for Javits Center exhibits & gallery mounts
Matte Sintra PVC rigid sign board with custom retail cafe menu and apothecary directory artwork mounted on brick in SoHo NYC
Waterproof Matte PVC • 3mm, 6mm & 12mm

Sintra PVC Rigid Sign Boards

Solid closed-cell expanded polyvinyl chloride (PVC) with a low-glare satin surface. 100% waterproof, dent-resistant, and ideal for custom sintra signs, retail POS displays, restaurant menu boards, and architectural indoor wayfinding.

  • Impervious to moisture, grease, and humidity
  • Easily CNC-routed into custom letters & shapes
  • Smooth matte finish in white or black PVC
Heavy-duty Dibond aluminum composite sign panel with high-contrast corporate contractor branding and project details in Manhattan NYC
Permanent Exterior Metal • 3mm & 6mm

Dibond Signs & ACM Metal Panels

Stays dead-flat with no oil-canning for 10+ years on NYC building facades, architectural signs, and permanent site hoardings.

  • 100% rustproof, wind-rated architectural metal
  • Brushed silver, matte white, or custom UV finishes
  • Pre-drilled for masonry anchors or Z-clip rails
Custom printed waterproof fluted Coroplast yard signs on wire H-stakes for retail promotion and grand opening in NYC
All-Weather Fluted Plastic • 4mm & 10mm

Coroplast Yard & Site Signs

Twin-wall fluted polypropylene panels for all-weather outdoor promotions, yard signs with galvanized wire H-stakes, real estate leasing boards, and construction fences.

  • 4mm standard (with H-stakes) or 10mm heavy-duty
  • Brass corner grommets for zip-tie fence mounting
  • 100% waterproof & UV fade-resistant inks
Luxury flame-polished clear cast acrylic office sign plaque with reverse UV printed branding and brushed stainless steel standoffs in Manhattan
Executive & Impact-Proof • 1/8" to 1/2"

Cast Acrylic & Lexan Rigid Boards

Glass-clear, frosted, or second-surface printed cast acrylic with subsurface white ink layers, plus unbreakable Lexan polycarbonate faces for vandal-resistant exterior directories and lightboxes.

  • Flame-polished or diamond-routed crystal edges
  • Includes brushed stainless or matte black standoffs
  • Second-surface UV print gives 3D depth effect
Architectural Substrate Engineering

How to Choose the Right Rigid Sign Board for NYC Environments

Selecting the wrong rigid core is the #1 cause of warped easel signs and bowed retail displays. Paper-faced Foam Board (Foamcore) is unbeatable for 1-to-3 day indoor events, conferences, and pitch presentations—but ambient humidity will eventually cause paper faces to bow over multi-week installations.

When your display needs to stay dead-flat across multi-day trade shows at the Javits Center or permanent corporate corridors, upgrading to 1/2" Gatorboard (wood-fiber veneer) or 6mm Sintra PVC (solid closed-cell plastic) eliminates moisture warping and corner dents completely. For permanent exterior storefronts, DOB construction hoardings, and high-wind street facades, 3mm or 6mm Dibond Aluminum Composite (ACM) delivers 10+ years of weatherproof structural stability.

Request Custom Board Pricing →

Signs River Flatbed & CNC Production Standards

  • Direct-to-Substrate UV Curing + White Ink:6-color + opaque white UV LED inks bond directly to brushed metal, clear acrylic, and black Gatorboard without lifting.
  • Anti-Glare Matte, Satin & Anti-Graffiti Laminates:Optional 3M cast UV overlaminates protect exterior Dibond and Sintra signs against harsh sunlight, scratches, and street tagging.
  • Custom CNC Contour Routing & Beveling:Digital camera registration cuts custom die-cut shapes, halo silhouettes, 1/4" radius corners, and V-grooved fold channels.
  • Professional Mounting Hardware Included:Order with pre-applied 3M VHB tape, fold-out easel backs, brass corner grommets, H-stakes, or stainless steel wall standoffs.
Side-by-Side Technical Matrix

Rigid Sign Board Comparison: Foam vs. Gator vs. Sintra vs. Dibond

Compare core materials, thicknesses, weather ratings, and mounting methods across our 6 primary rigid substrates.

SpecificationFoam Board (Foamcore)Gatorboard (Gatorfoam)Sintra Board (PVC)Coroplast (Fluted)Dibond ACM (Metal)Cast Acrylic / Lexan
Core MaterialPolystyrene Foam + Paper FaceDense Foam + Wood-Fiber VeneerSolid Expanded PVC PlasticTwin-Wall Fluted PolypropylenePolyethylene Core + Dual AluminumSolid Cast PMMA / Polycarbonate
Thicknesses3/16" (5mm), 1/2" (12mm)3/16", 1/2", 3/4", 1"2mm, 3mm (1/8"), 6mm (1/4"), 12mm4mm (3/16"), 10mm (3/8")3mm (1/8"), 6mm (1/4")1/8", 1/4", 3/8", 1/2"
EnvironmentIndoor OnlyIndoor Heavy-DutyIndoor & Outdoor100% Outdoor WaterproofPermanent ExteriorIndoor & Exterior
Dent & Warp ResistanceModerate (Soft corners)Extreme (Crush-Proof)High (Rigid & Tough)High (Flexible & Impact-Resistant)Maximum (Zero Bowing)Maximum (Shatter-Resistant)
Surface FinishSmooth Matte WhiteVelvet Matte White or BlackLow-Glare Satin MatteSemi-Matte (Light Fluting)Matte White or Brushed SilverCrystal Clear, Frosted, or Gloss
Best MountingTripod Easel, Wing Easel, TapeEasel, French Cleat, StandoffsVHB Tape, Screws, Ceiling HooksWire H-Stakes, Grommets, A-FrameMasonry Bolts, Z-Clips, FrameStainless Architectural Standoffs
Typical LifespanDays to 6 Months (Indoor)1-5+ Years (Indoor Reusable)3-5+ Years (Indoor/Outdoor)1-3 Years (Outdoor All-Weather)10+ Years (Outdoor Facades)10+ Years (Lobby & Exterior)
Commercial Use-Case Packages

Select Your Rigid Sign Tier by Application

Fast-track your quote by choosing the industry-standard board specification for your event, retail store, or building facade.

Events, Conferences & Pitching

3/16" Foamcore & Gatorboard

Engineered for corporate town halls, gala check-in easels, courtroom visuals, and Javits Center booth displays.

  • Popular sizes: 18"×24", 24"×36", 30"×40", 36"×48"
  • Glare-free matte UV printing for stage lighting
  • Optional adhesive double-wing easel backs
  • Upgrade to 1/2" Black Gatorboard for multi-show reuse
  • Delivery availability confirmed with your quote
Quote Event & Easel Boards →
Permanent Exterior & Lobby

3mm/6mm Dibond ACM & Acrylic

Architectural metal composite and flame-polished cast acrylic built for storefront fascias, construction hoardings, and executive lobbies.

  • Full 48"×96" (4'×8') & 60"×120" (5'×10') panels
  • UV weather-shield & anti-graffiti overlaminates
  • Brushed aluminum, matte white, or clear standoff finish
  • Meets NYC DOB & commercial fire-rating standards
  • Professional NYC/NJ on-site installation crew available
Quote Dibond & Acrylic →
The Signs River Process

How We Print & Route Your Custom Rigid Signs in NYC

We review your artwork, confirm materials, and agree on a production and delivery schedule.

01

Prepress & Cut Path

We verify your artwork DPI, Pantone/CMYK color profiles, bleed margins, and vector CNC die-cut paths.

02

Digital Proof Approval

You receive a scaled production proof showing exact board dimensions, hole placements, and hardware callouts.

03

Flatbed UV Printing

Boards are vacuum-locked onto our flatbed UV presses and printed at true 1200 DPI with instant LED curing.

04

CNC Router Finishing

Optical-camera CNC routers cut custom shapes, round corners, bevel edges, and drill standoff or grommet holes.

05

NYC Courier or Install

Corner-protected flat-pack courier delivery across all 5 boroughs, or professional mounting by our NYC install crew.

Direct NYC Flatbed Print & CNC Studio

Get Fast Rigid Sign Pricing & Digital Proofs

Send dimensions, substrate, quantity, artwork, and your deadline for an itemized quote.

  • Free Prepress File Check & Vector Cut-Path Setup
  • Direct 1200 DPI Flatbed UV Printing (Single or Double-Sided)
  • Ask About Expedited Delivery Across NYC
  • Full 4'×8' Sheets & Custom CNC Contour Shapes

Need immediate rush specs or material advice?
Call (660) 851-6292 • sales@signsriver.com • Mon–Sat 9AM–6PM

Commercial Signage & 3D Proof Quote Form
Rigid Board Printing FAQs

Frequently Asked Questions About Rigid Signs in NYC

Answers to common questions about materials, durability, cutting, and delivery.

Standard Foam Board (Foamcore) features a lightweight polystyrene foam center faced with smooth clay-coated paper, making it economical for 1-to-3 day indoor easel displays and presentations. Gatorboard (Gatorfoam) uses a high-density polystyrene core bonded to hard wood-fiber veneer faces. Gatorboard will not dent at the corners, will not bow over time, and can be reused across dozens of trade shows and corporate events.
For permanent exterior storefront signs, building facades, and construction hoardings, 3mm or 6mm Dibond Aluminum Composite (ACM) is the architectural gold standard—offering 10+ years of rustproof, dead-flat durability in NYC winters and summer heat. Whether you require an exterior dibond sign, custom architectural dibond signage (sometimes colloquially searched as die bond sign), or heavy-duty dibond signs, ACM panels will not warp or crack. For short-to-medium term outdoor signage (1–3 years), 6mm Sintra PVC and 10mm Coroplast are 100% waterproof and budget-friendly.
Some print-ready rigid sign orders may qualify for a faster schedule. Ask us to confirm timing, materials, and delivery for your project.
Standard full-size rigid sheets measure 48" × 96" (4 ft × 8 ft) across Foam Board, Gatorboard, Sintra PVC, Coroplast, and Dibond ACM. We also stock oversized 60" × 120" (5 ft × 10 ft) sheets in Sintra PVC and Dibond ACM for grand-format architectural panels, and can tile multi-panel walls to any width.
Absolutely. Our digital optical-registration CNC routers cut custom contour silhouettes, life-size standees, halo-cut logos, rounded corners, and precision holes for stainless steel standoffs, brass grommets, or ceiling suspension cables.
We offer both! For 90% of commercial projects, we print directly onto the rigid substrate using industrial 1200 DPI UV flatbed presses, which cures the ink instantly into a scratch-resistant matte finish. For applications requiring high-gloss automotive finishes, dry-erase surfaces, or 10-year anti-graffiti protection, we mount premium 3M cast vinyl with optical overlaminates onto the board.